Difference between revisions of "Amplifiers"
| Line 2: | Line 2: | ||
===low powered amps (up to 30W/channel)=== | ===low powered amps (up to 30W/channel)=== | ||
[[File:DTA-1-front.jpg|80px]][[Amps:Dayton-DTA-1|Dayton DTA-1]]: 2 x 15 watts RMS (into 4 ohms @ 10% THD), 2 x 10 watts RMS (into 4 ohms @ 0.1% THD) | [[File:DTA-1-front.jpg|80px]][[Amps:Dayton-DTA-1|Dayton DTA-1]]: 2 x 15 watts RMS (into 4 ohms @ 10% THD), 2 x 10 watts RMS (into 4 ohms @ 0.1% THD) | ||
| + | |||
| + | |||
[[Lepai LP-2020A+|Lepai LP-2020A+]] | [[Lepai LP-2020A+|Lepai LP-2020A+]] | ||
Revision as of 21:05, 14 April 2016
Contents
Pre-built Amplifiers
low powered amps (up to 30W/channel)
Dayton DTA-1: 2 x 15 watts RMS (into 4 ohms @ 10% THD), 2 x 10 watts RMS (into 4 ohms @ 0.1% THD)
medium powered amps (up to 100W/channel)
Pyle Pro PCA3: 2 x 75W/channel @ 4Ω - Class D
high powered amps (above 100W/channel)
Amphony 200: 2 channels at 40W, or bridged mono @ 80W (rms) or 150W (peak)
subwoofer amps
Amplifier Boards
amplifiers boards you assemble yourself such as this one
Building Your Own Amplifier
It would be great to have some pages here that would discuss building your own, with relevant issues such as power supplies, soldering, etc. (Adrian??)
